Macbook Air Apple Hardware Test 6 2 Dmg

  1. Apple Hardware Test Won't Run
  2. Macbook Air Apple Hardware Test 6 2 Dmg Review

After isolating an issue on your Mac to a probable hardware issue, you can use Apple Hardware Test to help determine which hardware component might be causing the issue.

I've got MacBook Pro (15-inch, Late 2011) with Apple Hardware Test originally accessed by holding D at startup. However after restoring Mac OS X Lion by the Internet using Lion Recovery D-key stopped working.

Hardware

If your Mac was introduced after June 2013, follow the steps for using Apple Diagnostics instead.

How to use Apple Hardware Test

  1. Disconnect all external devices except keyboard, mouse, display, Ethernet connection (if applicable), and connection to AC power. Apple Hardware Test might display an error message if you don't disconnect all other devices.
  2. Make sure that your Mac is on a hard, flat, stable, well-ventilated work surface.
  3. Shut down your Mac.
  4. Turn on your Mac, then immediately press and hold the D key on your keyboard. Keep holding the D key until you see the Apple Hardware Test icon:
  5. Select your language and click the right arrow. If you aren't using a mouse, you can use the up and down arrows to select a language, then press the Return key.
  6. To begin testing, click the Test button, press T, or press Return. Optionally select 'Perform extended testing' before beginning the test. This performs a more thorough test that takes longer to complete.
  7. When the test is complete, review your test results in the lower-right section of the window.
  8. To quit Apple Hardware Test, click Restart or Shut Down at the bottom of the window.

Apple Hardware Test Won't Run

Apple

Learn more

Macbook Air Apple Hardware Test 6 2 Dmg Review

  • Some Mac computers that shipped with OS X Lion v10.7 or later will start up from AHT over the Internet if your startup disk doesn't contain AHT, or if you hold down Option-D at startup. This requires an Internet connection over Ethernet or Wi-Fi.
  • If you're using OS X Lion v10.7 or earlier and you can't get AHT to start, see if you have an OS X installation disc named “Applications Install Disc 2.” Insert the disc in your internal optical drive or external Apple SuperDrive before following the steps above. Or, if you're using a MacBook Air (Late 2010), plug the MacBook Air Software Reinstall thumb drive into your USB port instead.

After isolating an issue on your Mac to a possible hardware issue, you can use Apple Diagnostics to help determine which hardware component might be causing the issue. Apple Diagnostics also suggests solutions and helps you contact Apple Support for assistance.

If your Mac was introduced before June 2013, it uses Apple Hardware Test instead.

How to use Apple Diagnostics

  1. Disconnect all external devices except keyboard, mouse, display, Ethernet connection (if applicable), and connection to AC power.
  2. Make sure that your Mac is on a hard, flat, stable surface with good ventilation.
  3. Shut down your Mac.
  4. Turn on your Mac, then immediately press and hold the D key on your keyboard. Keep holding until you see a screen asking you to choose your language. When Apple Diagnostics knows your language, it displays a progress bar indicating that it's checking your Mac:
  5. Checking your Mac takes 2 or 3 minutes. If any issues are found, Apple Diagnostics suggests solutions and provides reference codes. Note the reference codes before continuing.
  6. Choose from these options:
    • To repeat the test, click ”Run the test again” or press Command (⌘)-R.
    • For more information, including details about your service and support options, click ”Get started” or press Command-G.
    • To restart your Mac, click Restart or press R.
    • To shut down, click Shut Down or press S.

If you choose to get more information, your Mac starts up from macOS Recovery and displays a web page asking you to choose your country or region. Click ”Agree to send” to send your serial number and reference codes to Apple. Then follow the onscreen service and support instructions. When you're done, you can choose Restart or Shut Down from the Apple menu.

Mac os x 10.4 intel dmg

This step requires an Internet connection. If you're not connected to the Internet, you'll see a page describing how to get connected.

Learn more

If holding down the D key at startup doesn't start Apple Diagnostics:

  • If you're using a firmware password, turn it off. You can turn it on again after using Apple Diagnostics.
  • Hold down Option-D at startup to attempt to start Apple Diagnostics over the Internet.
Comments are closed.